Argox MP Series User Manual page 30

users' comprehension for further actions to take.
READY On – Normal operation.
Blinking – Error conditions including ribbon out, media
out, print tasks cancelled, printing errors, printer
paused, printer receiving data from host.
MEDIA On – Normal operation.
Blinking – Media is used out; install new media.
Print head overheated (printer will resume printing
automatically later.)
RIBBON On – thermal transfer mode; install ribbon.
Off – direct thermal mode; no need to install ribbon.
Blinking – Ribbon is used out; install new ribbon.
Note: Mode selection between thermal transfer and direct
thermal can be set via labeling software, windows driver,
printer commands, or DIP Switch.
30
MP Series - User's Manual