Displaying The Help Screen - Brother HE-800C Instruction Manual

7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)

7-6. Displaying the help screen

The help screen is a screen which uses graphics to show how to switch the sewing machine to data initialization mode,
production counter setting mode and lower thread counter setting mode. (Refer to the table below for details.)
1
Press the FUNC key while the sewing machine is in standby during automatic sewing mode, test feeding mode, program
mode or cycle program mode.
4235B
2
When the FUNC key is released, the display will return to the normal display.
NOTE:
If the FUNC key has been assigned as a shortcut key by changing the memory switch settings, it will not be possible to
display the help screen. To display the help screen, change the setting for memory switch No. 300 to OFF. (Refer to "7-2.
Setting memory switches".)
Meaning of help screen symbols
Symbol
4236B
4237B
4238B
61
* The help screen will be displayed while the FUNC key is
Meaning
How to switch to data initialization
mode
Switching to production
setting mode
Switching to lower thread counter
setting mode
HE-800C
being pressed.
While holding down the RESET key, push
the POWER switch to the ON side.
counter While the sewing machine is at standby in
automatic sewing mode, hold down the
ENTER key and press the ▲ key.
While the sewing machine is at standby in
automatic sewing mode, hold down the
ENTER key and press the ▼ key.
Operation method
4285B