Table of Contents
Advertisement
3. INSTALLATION
Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric
shock, and problems with correct operation may also occur.
Connect cords that match the voltage specifications.
Operator
17
CAUTION
Green and yellow wire
(ground wire)
HE-800C
<200 V system>
(1) Power switch
(2) Screws [2 pcs]
4145M
(3) 3-pin power supply connector
4757M
(4) Power cord
(5) Staples [5 pcs]
1. Attach an appropriate plug to the
power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert
the
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the staples
(5) to make sure that they do not
pierce the cords.
• Do
not
use
otherwise
problems may result.
3. Use the six screws to tighten the
cover of the control box. Check that
none of the cords are being clamped
by the cover at this time.
power
plug
into
a
extension
cords,
machine
operation
Hide quick links:
Advertisement
Table of Contents
