3. INSTALLATION
<Motor P.C. board>
Upper shaft motor 4-pin
Synchronizer 10-pin
Operation panel 4-pin
11
Connector
4748M
Connection location on
motor P.C. board
(UVW)
P11 (SYNC)
P3 (PANEL)
4. Close the cord presser plate (3) in the direction of the left
arrow, and secure it by tightening the two screws (2).
NOTE: Close the cord presser plate (3) securely so that
no foreign objects, insects or small animals can
get inside the control box.
5. Check that the cords (1) do not get pulled, and then gently
return the machine head to its original position.
HE-800C
Lock the cord
clamp securely.
Cord clamp
(7)
(4) (5)
(4) (5)
4747M