Copying Programs - Brother HE-800C Instruction Manual

5-9. Copying programs

To create a program with parameters that are almost exactly the same as those of another program, you can copy the original
program and change just the parts which need to be changed
1
Press any one of the following keys.
(Any one of these keys can be pressed.)
2
Press the COPY key.
(The sewing machine will switch to program copy mode.)
Flashing
4220B
3
Select the program number for the copying source (1).
4787M
4
Select the program number for the copying destination (2).
4792M
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
.
The program number for the copying source (1) and the program
number for the copying destination (2) before entering this mode will
appear in the display.
・ The program number for the copying source (1) changes in the
order shown in the illustration each time the
pressed.(The
direction.)
・ The program number for the copying source (1) and the program
number for the copying destination (2) must both be program
numbers for the same types of programs.
Independent program: P01～P50
Cycle program: C1～C9
The program number for the copying source (1) and the program
number for the copying destination (2) must both be program
numbers for the same types of programs.
HE-800C
Independent program
key changes the order in the opposite
4219B
4810M
Cycle program
Flashing
key is
4811M
Flashing
4812M
46