Function Setting Switch Setting - Mitsubishi Electric NZ2MF2S1-32D User Manual

Function setting switch setting

Set the input response time setting and output HOLD/CLEAR setting using the function setting switch on the front of I/O
module.
No. Switch name
1 Function setting switch 1 to 3
2
3
4 Function setting switch 4
Do not change the function setting switch while the module is powered on. Changing the function setting
switch while the module is powered on causes a minor error and flashes the ERR. LED. Returning the
function setting switch to the previous setting eliminates the error and turns off the ERR. LED.
6 INSTALLATION AND WIRING
72
6.2 Setting Switch
Function to be used
Input response time setting
function
Output HOLD/CLEAR setting
function
Setting details
Set the input response time.
For setting method, refer to the following.
Page 86 Setting method
Set output HOLD/CLEAR.
For setting method, refer to the following.
Page 87 Setting method