Substitute Value Setting Function And Parameter Setting; Process Data; Troubleshooting - Mitsubishi Electric NZ2FTGN User Manual

Substitute value setting function and parameter setting

The following table lists the parameters that can be set for the NZ2FTS4-4TE.
Item
DO 0 (Channel 0) Substitute value
DO 1 (Channel 1)
DO 2 (Channel 2)
DO 3 (Channel 3)
*1 (0) and (1) are the values set in the register when the digital I/O module is connected to the NZ2FT-MT or the NZ2FT-EIP.

Process data

The following table lists the Process data of the NZ2FTS4-4TE.
Input/ Address Bit
Output (byte)
Output 0 b0
b1
b2
b3
b4
b5
b6
b7

Troubleshooting

For troubleshooting the NZ2FTS4-4TE, refer to the following.
Page 474 Troubleshooting for Digital Output Modules
Description
Sets the output ON/OFF state when a fieldbus error has occurred.
It depends on the setting of the parameter "Output behaviour on
fieldbus error" of the coupler.
Description
DO 0 (Channel 0)
DO 1 (Channel 1)
DO 2 (Channel 2)
DO 3 (Channel 3)
System area
System area
System area
System area
*1
Setting range
• Off (0)
• On (1)
(Default: Off)
15 DIGITAL OUTPUT MODULE
15.1 NZ2FTS4-4TE
15
449