Toshiba MMC-AP0157HP1-E Service Manual page 92

No. Part name
3) When the bearing is installed in the
shaft, perform work of 1) .
The coupling side is set to the ditch
and the fan is fixed with the hexagonal
screw hole.
NOTE
Be sure to use a torque wrench for
fixing and tighten with 2.5 to 3.4N.m.
4) The shaft that inserts the fan is inserted
in the coupling.
After the bearing is installed, it tightens.
5) Attach the bearing in the main body
6) The coupling inserted by the work of 4)
NOTE
Be sure to use a torque wrench for
fixing and tighten with 4.9N•m or more.
7) The fan is positioned so that the fan
NOTE
Be sure to use a torque wrench for
fixing and tighten with 4.9N•m or more.
8) Attach the fan case (under) as original
and check the fan turns smoothly without
coming to contact with the fan case or
abnormal sound is not heard.
Procedure
as original.
(Ø8 x 16, 2 pcs.)
is set to the ditch of the shaft and it
fixes with hexagonal screw hole.
may become a center for fan case
(upper), and it fixes with the hexagonal
screw hole.
The ditch of shaft
Be sure to confirm that the fan is at
the center of the fan case.
– 92 –
FILE NO. SVM-16042
Remarks
The ditch of shaft
Coupling
Fan case (upper)