Table of Contents
Advertisement
No.
Item
18
Louver control:
1) Louver position setup
2) Swing setup
3) When the unit stopped or the warning was output, the louver is
4) When PRE-HEAT
Outline of specifications
When the louver position is changed, the position moves
necessarily to downward discharge position once to return to
the set position.
The louver position can be set up in the following operation
range.
In cooling/dry operation
In group operation, the louver positions can be set up
collectively or individually.
In case of refrigerant recovery control, the louver position
becomes horizontal.
[SWING] is displayed and the following display is repeated.
In all operations
In group operation, the louver positions can be set up
collectively or individually.
automatically set to full closed position.
(Heating ready) is displayed
(Heating operation started or defrost operation is performed),
heating thermo is off, the louver is automatically set to horizontal
discharge position.
In heating/fan operation
(Repeats)
– 28 –
FILE NO. SVM-16042
Remarks
Advertisement
Table of Contents
