Maintenance Footnotes - Hummer 2009 H3 Owner's Manual

Service and Miles (Kilometers)
Engine cooling system service (or every
five years, whichever occurs first).
An Emission Control Service.
See footnote (i).
Inspect engine accessory drive belt.
An Emission Control Service.
See footnote (k).

Maintenance Footnotes

# Lubricate the front suspension,
steering linkage, and parking brake
cable guides. Control arm ball
joints require lubrication but should
not be lubricated unless their
temperature is 10°F (-12°C) or
higher, or they could be damaged.
(a) Visually inspect brake lines
and hoses for proper hook-up,
binding, leaks, cracks, chafing, etc.
Inspect disc brake pads for wear
and rotors for surface condition.
Inspect other brake parts, including
calipers, parking brake, etc.
Additional Required Services (cont'd)
25,000 50,000
(40 000) (80 000)
(b) Visually inspect front and rear
suspension and steering system
for damaged, loose, or missing
parts, signs of wear or lack
of lubrication. Inspect power steering
lines and hoses for proper hook-up,
binding, leaks, cracks, chafing,
etc. Visually check constant velocity
joints, rubber boots and axle
seals for leaks. Rotate and inspect
U-joints, retainers, and bolts on
rear drive shaft for seizing or
loosening.
Maintenance Schedule
75,000 100,000
(120 000) (160 000)
(c) Visually inspect hoses and have
them replaced if they are cracked,
swollen, or deteriorated. Inspect
all pipes, fittings, and clamps;
replace with genuine parts as
needed. To help ensure proper
operation, a pressure test of
the cooling system and pressure
cap and cleaning the outside of
the radiator and air conditioning
condenser is recommended at least
once a year.
6-7
125,000 150,000
(200 000) (240 000)
•
•