Removing The Spare Tire And Tools (H3T) - Hummer 2009 H3 Owner's Manual

Remove the center cap, if
equipped, by placing the flat
end of the wheel wrench in the
slot on the wheel and gently
pry the center cap out.
2. Use the wheel wrench to remove
the wheel nuts securing the
spare tire.
If the vehicle has locking lug
nuts, the key is supplied in the
tool bag. Use the key along
with the wheel wrench to remove
the wheel nuts from the tire.
3. You may need assistance to
remove the spare tire. Pull
off and gently lower the spare
tire to the ground. Set it next to
the flat tire.
Service and Appearance Care
Removing the Spare Tire
and Tools (H3T)
To access the jack and tools
located under the rear seat:
1. Turn the wing nut (A)
counterclockwise to release
the jack and tools.
2. Remove the jack and tool kit
from the bracket.
3. Release the straps (B) that
secure the tool bag to the jack.
5-69