Storing A Flat Or Spare Tire And Tools (H3T) - Hummer 2009 H3 Owner's Manual

5-80 Service and Appearance Care
Storing a Flat or Spare
Tire and Tools (H3T)
{
CAUTION
Storing a jack, a tire, or other
equipment in the passenger
compartment of the vehicle could
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
A. Spare Tire/Flat Tire
(Valve Stem Pointed Down)
B. Tire/Wheel Retainer
C. Hoist Cable
D. Hoist Assembly
E. Hoist Shaft
F. Jack Handle Extension(s)
G. Wheel Wrench
H. Hoist Shaft Access Ramp
I. Hoist End of the Extension Tool
To store the flat or spare tire on the
spare tire mount:
1. Place the flat or spare tire (A) on
the ground at the rear of the
vehicle with the valve stem
pointed down and to the rear.
2. Tilt the tire. Separate the
tire/wheel retainer (B) from the
guide pin. Pull the pin through