Hummer 2009 H3 Owner's Manual page 163

contact XM at.xmradio.com or call
1-800-929-2100 in the U.S. and
xmradio.ca or call 1-877-438-9677
in Canada.
4
(Information) (XM Satellite
Radio Service): Press to display
additional information current
4
XM station when is shown on the
display. When the complete
4
message has shown,
from the display. The last
message can be viewed until a new
message is received or the station
is changed.
•
Parts of the message appear
every three seconds if the
entire message cannot be shown
on the display at once.
4
•
Press and release
scroll through the message.
4
•
When is pressed and a
message is not available from the
station, NO INFO is shown on
the display.
Selecting an FM/AM/XM Station
BAND: Press to select FM1,
FM2, AM, XM1, or XM2.
Manual Tuning
e (Tune): Turn to select a radio
station.
Automatic Tuning
1-6 (Preset Pushbuttons): Press
disappears
to select preset stations.
t
SEEK
go to the previous or next station
and stay there. The radio only stops
at stations with a strong signal.
Press and hold to scan stations or
preset stations.
To scan stations:
to manually
1. Press and hold
than two seconds. SCN or SCAN
displays and the radio beeps
once. The radio goes to a station,
plays for a few seconds, then
goes to the next station.
u
: Press and release to
t u
or for more
Instrument Panel
t u
2. Press or again or one of
the pushbuttons to stop
scanning presets.
To scan preset stations:
t
1. Press and hold or
than four seconds. PSC or
PSCN displays and the radio
beeps twice. The radio goes to a
preset station, plays for a few
seconds, then goes to the
next preset station.
t u
2. Press or again or one of
the pushbuttons to stop
scanning presets.
Programming Preset Stations
Up to 30 stations (six FM1, six FM2,
and six AM, six XM1 and six XM2),
and equalization settings for
each station can be programmed on
the six numbered pushbuttons.
To program presets:
1. Turn the radio on.
2. Press BAND to select FM1, FM2,
AM, or XM1 or XM2.
3-45
u
for more