Lexmark XM7200 Series User Manual page 223

Understanding the printer menus
Print Settings
Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Print Area
Normal
Fit to Page
Whole Page
Download Target
RAM
Flash
Disk
To
Set the default printer language.
Notes:
•
PS Emulation is the factory default printer language.
•
Setting a printer language as the default does not
prevent a software program from sending print jobs that
use another printer language.
Specify that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They
are stored in a separate print queue, so other jobs print
normally. When the missing information or options are
obtained, the stored jobs print.
Notes:
•
Off is the factory default setting.
•
This menu appears only when a printer hard disk is
installed. This requirement ensures that stored jobs are
not deleted if the printer loses power.
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the
Normal setting, the printer clips the image at the
boundary.
•
Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting. Whole
Page only affects pages printed using a PCL 5e
interpreter. This has no effect on pages printed using the
PCL XL or PostScript interpreter.
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in
the RAM is temporary.
•
Storing downloads in the flash memory or in a printer
hard disk places them in permanent storage. Downloads
remain in the flash memory or in the printer hard disk
even when the printer is turned off.
•
This menu appears only when a formatted, working flash
drive or printer hard disk is installed.
223