Lexmark XM7200 Series User Manual page 196

Understanding the printer menus
Use
Scan edge to edge
Off
On
Sharpness
1–5
Sample Copy
Off
On
Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
General Fax Settings
Use
Restore Factory Defaults
Optimize Fax Compatibility
Fax Name
Fax Number
Fax ID
Fax Name
Fax Number
Enable Manual Fax
On
Off
Memory Use
All receive
Mostly receive
Equal
Mostly send
All send
To
Allow edge‑to‑edge scanning of the original document.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Create a sample copy of the original document.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk
is installed.
To
Restore the factory defaults of all fax settings.
Optimize fax compatibility with other fax machines.
Specify the name of the fax in the printer.
Specify the number assigned to the fax.
Specify how the fax is identified.
Note: Fax Number is the factory default setting.
Set the printer to fax manually, which requires a line splitter and a telephone
handset.
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
•
Press # 0 on the numeric keypad to go directly to this setting.
Define the allocation of non-volatile memory between sending and receiving fax
jobs.
Note: Equal is the factory default setting.
196