Lexmark XM7200 Series User Manual page 216

Understanding the printer menus
Use
Shadow Detail
‑4 to 4
ADF Multi–feed Sensor
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Flash Drive menu
Scan Settings
Use
Format
PDF (.pdf)
TIFF (.tif)
JPEG (.jpg)
XPS (.xps)
RTF (.rtf)
TXT (.txt)
PDF Settings
PDF Version
1.2–1.7
A–1a
A–1b
PDF Compression
Normal
High
Secure PDF
Off
On
Searchable PDF
Off
On
To
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Specify the amount of sharpness of the scanned image.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
To
Specify the file format.
Note: PDF (.pdf) is the factory default setting.
Configure the PDF settings.
Notes:
•
1.5 is the factory default setting for PDF Version.
•
Normal is the factory default setting for PDF Compression. This menu
item appears only when a formatted, working hard disk is installed.
•
Off is the factory default setting for Secure PDF and Searchable PDF.
Secure PDF requires you to enter your password twice.
216