2.9 Data Displays
2.9.1
Generator Mechanical Values
Overview display
It is possible to display up to 6 mechanical values at the
same time. By default, the following values are
displayed:
Working hours counter (number of operating hours)
Fuel level (daily service tank or main tank)
Starter battery voltage
Coolant temperature (HT coolant temperature in the
case of a dual circuit engine)
Oil pressure
Oil temperature
The display area showing six mechanical values is
called the Favorites page. The content of this page can
be altered at any time. Each mechanical value is
represented by an information bar containing the
information shown in Figure 2-13.
Figure 2-14 Scrolling within the Favorites Page
TP-7070 8/20
Favorites page
Favorites
1
Favorites
5
4
1. Information bar
2. Name/description of the mechanical value
3. A visual display of the value: bar graph, thermometer, meter
4. The numerical value (56 C, 28V, 5.1 bar, etc.)
5. A pictogram
Figure 2-13 Favorites Page
The mechanical values can be scrolled through page by
page. Press the < and > buttons to scroll through the
pages. See Figure 2-14
Page 1/1
3
Section 2 Operation
2
29