Inspection After A Collision; Cleaning; Built-In Child Seat Maintenance; Safety Seats For Children - Ford 1996 Explorer Manual

Inspection after a collision

All built-in child restraints, including seats, buckles,
retractors, seat latches, interlocks, and attaching hardware
should be inspected by a qualified dealer technician after
any collision. If the child seat was in use during a
collision, Ford recommends replacing it. However, if the
collision was minor and a qualified technician finds that
the child restraints do not show damage and continue to
operate properly, they do not need to be replaced.
Built-In Child Seats not in use during a collision should
also be inspected and replaced if either damage or
improper operation is noted.

Cleaning

Your built-in child seat may be cleaned with mild soap and
water. Do not use household cleaners as they may weaken the
webbing or damage the plastic parts. For your convenience, the
liner is made to be machine washable and air dried (do not use
heat).

Built-in child seat maintenance

Regularly inspect the lap and shoulder belts system of your
child seat. See your Ford Dealer if the shoulder belt webbing is
frayed, or if the buckle and tongue are damaged and/or do not
function properly.

Safety Seats for Children

Use a safety seat that is recommended for the size and weight
of the child. Always follow the safety seat manufacturer's
instructions when installing and using the safety seat.
Ford recommends the use of a child safety seat having a top
tether strap. Install the child safety seat in a seating position
which is capable of providing a tether anchorage. For more
52
RWARNING