Midline Stereo Radio - Ford 1996 Explorer Manual

Midline Stereo Radio

Using the Controls on Your New Radio
How to turn the radio on and off
Press the "VOL/PUSH ON" knob to turn the radio on. Press
again to turn it off.
How to adjust the volume
Turn the "VOL/PUSH ON" knob clockwise to increase the
volume and counterclockwise to decrease the volume. Bars
illuminate in the display to show relative volume level.
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a "nominal" listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
Selecting the AM or FM frequency band
Push the "AM"/FM" button to select the desired frequency
band or to stop/store cassette tape (when in cassette mode).
These functions are used with the station memory buttons
described under How to tune radio stations.
How to tune radio stations
There are four ways for you to tune in a particular station. You
can manually locate the station using the "TUNE" button,
"SEEK" button, "SCAN" button, or select the station by using
the memory buttons, which you can set to any desired
frequency. These four methods are described below.
238