The cargo shade
The shade is a wind-up type, just like a window shade. Over
time the shade may lose its spring tension. If this happens, you
can easily rewind the shade with the help of another person.
To rewind the shade:
Remove the shade from its side anchor slots by compressing
1.
telescoping tube.
Extend the shade fully. Make sure the smooth grain side is
2.
facing you (see Figure 1).
Wrap the vinyl around the roller tube two times in the
3.
direction shown in Figure 1.
Tuck the edges of the vinyl inside the end cap with each
4.
wrap.
152