Ford 1996 Explorer Manual page 153

Fold the edges of the vinyl toward the center. Make sure the
5.
edges of the vinyl clear the end cap slots (see Figure 2). Use
masking tape or a rubber band to hold the vinyl on the left
side of the roller tube.
While holding the vinyl and roller tube as shown in Figure
6.
2, push the right end cap (marked with an "R") about 1/4
inch to disengage the clutch.
Wind the shade 14 revolutions in the direction shown in
7.
Figure 2. (The wind direction is also marked on the end
cap.)
Figure 1
Features
153