Ford 1996 Crown Victoria Manual page 300

Parts of the high-mount brakelamp
To remove the high-mount brakelamp:
1. Remove the two retaining screws with a
Phillips screwdriver.
2. Then lift the whole assembly up and over
the retaining brackets. Do not move upper
part of plastic attachment brackets.
3. Twist socket counterclockwise to remove
from lamp.
4. Pull bulb out of socket.
5. Replace the burned out bulbs.
To install the high-mount brakelamp:
1. Position the brakelamp over the retaining
brackets.
2. Install and tighten the two retaining screws.
284