Ford 1996 Crown Victoria Manual page 143

Luxury Audio System
Using the Controls on Your New Radio
How to turn the radio on and off
Press the "VOL/PUSH ON" knob to turn the
radio on. Press again to turn it off.
How to adjust the volume
Turn the "VOL/PUSH ON" knob to the right to
increase the volume and to the left to decrease
the volume.
NOTE: If the volume level is set above a
certain listening level when the
ignition switch is turned off, when the
ignition switch is turned back on, the
volume will come back to a "nominal"
listening level. However, if the radio
power is turned off (with the
"VOL/PUSH ON" button), the volume
will remain in the position it was set
at when radio power is switched back
on (digital systems only).
Selecting the AM or FM frequency band
Push the "AM/FM" button to select the desired
frequency band. Pushing the "AM/FM" button
causes the frequency band to switch from "AM"
to "FM1" to "FM2" to "AM", changing one band
to the next each time the button is pressed.
These functions are used with the station
memory buttons described under How to tune
radio stations.
How to tune radio stations
There are four ways for you to tune in a
particular station. You can use the "TUNE",
"SEEK", "SCAN" or memory buttons.
151