Ford 1996 Crown Victoria Manual page 299

Removing the headlamp bulb
1. Make sure that the headlamp switch is in
the OFF position.
2. Lift the hood, open access panel above
headlamp and find the bulb in the headlamp
socket.
3. Remove the electrical connector by pulling
off the bulb base.
4. Remove the bulb by turning it 1/4 of a turn
to free it from the socket.
Installing the headlamp bulb
1. Insert the glass envelope of the bulb into the
socket while aligning the locking tabs.
2. Rotate the bulb 1/4 turn to lock.
3. Push the electrical connector into the rear of
the plastic base until it snaps, locking it into
position.
4. Close the access panel.
High-Mount Brakelamp Bulbs
Your vehicle has a brakelamp mounted in the
rear window, called a high-mount brakelamp.
You may need to remove this lamp at times to
replace the brakelamp bulb or to clean the rear
window.
283