Ford 1996 Crown Victoria Manual page 179

select the station by using the memory buttons,
which you can set to any desired frequency.
These four methods are described below.
Using the "TUNE" function
You can change the frequency up or down
one increment at a time by pressing and
releasing either the left ( b ) or right ( a ) side
of the "TUNE" button.
Manual tuning adjusts your radio to any
allowable broadcast frequency, whether or
not a station is present on that frequency.
(See All About Radio Frequencies in this
section.)
Using the "SEEK" function
This feature on your radio allows you to
automatically select listenable stations up or
down the frequency band. Press the right
( a ) side of the "SEEK" button to select the
next listenable station up the frequency band.
Press the left ( b ) side of the button to select
the next listenable station down the
frequency band. By holding the button down,
listenable stations can be passed over to reach
the desired station.
Using the "SCAN" function
Pressing the "SCAN" button will begin the
scan mode up the frequency band, stopping
on each listenable station for approximately
five seconds.
To stop the scan mode on the presently
sampled station, press the "SCAN" button
again.
163