6. Rotate the high-mount lamp socket
counterclockwise and remove it from the
housing.
7. Carefully remove the bulb by gently pulling
it straight from the socket.
To install a bulb:
1. Firmly install the replacement bulb into the
socket.
2. Place the socket assembly in the high-mount
stoplamp housing and turn clockwise to lock
into position.
3. Position the hatchback trim panel and
connect the luggage compartment lamp
electrical connector (if equipped).
4. Insert the trim panel retaining clips into the
locating holes in the hatchback and push
each clip firmly into position.
5. Install the rear wiper motor cover (if
equipped).
6. Close the hatchback and reconnect the
negative battery cable.
228