Ford 1996 Aspire Manual page 139

4. Check all battery terminals and remove any
excessive corrosion before you attach the
jumper cables.
5. Turn on the heater fan in both vehicles.
Press the DEFROST button. Turn off all
other switches and gauges.
Connecting the jumper cables
1. Connect one end of the first jumper cable to
the positive (+) terminal of the discharged
battery. (You can connect either jumper cable
to the positive (+) terminal, as long as you
use the same cable for both positive
terminals.) Most jumper cables have a red
cable and a black cable. The red cable is
generally used for the positive terminals and
the black for the negative ones.
2. Connect the other end of the first cable to
the positive (+) terminal of the booster
battery.
3. Connect one end of the second cable to the
negative ( ) terminal of the booster battery
— NOT to the discharged battery.
4. Connect the other end of that cable to a
good metallic surface on the engine or frame
of the disabled vehicle. The following
illustration shows where you can find a
metallic surface.
Do not connect the end of the second
cable to the negative ( ) terminal of the
battery to be jumped. A spark may cause
an explosion of the gases that surround
the battery.
RWARNING
139