Table of Contents
Advertisement
4. Look through the transparent side of the
fuse to see if the metal wire inside is
separated. If it is, replace the fuse with one
of the same amperage only. You can use the
amp rating number on the fuse as well as
the color to identify the correct replacement.
Always replace a fuse with one that has
the specified amperage rating. Using a
fuse with a higher amperage rating can
cause severe wire damage and could start
a fire.
5. Reinstall the fuse puller on the inside of the
fuse panel cover.
6. Install the fuse panel cover.
Even after you replace a fuse, it will continue to
blow if you do not find what caused the
overload. If the fuse continues to blow, have
your electrical system checked.
The following chart indicates the colors and
amperage ratings of standard fuses.
222
RWARNING
Hide quick links:
Advertisement
Table of Contents
