Table of Contents
Advertisement
The sequence for connecting the jumper cables
Jump-Starting
1. Make sure that the jumper cables are not in
the way of moving engine parts, then start
the booster vehicle. Run the engine at a
moderate speed.
2. Let the discharged battery charge for a few
minutes and then start the disabled vehicle.
It may take a couple of tries before the
vehicle starts. If the vehicle does not start
after several attempts, there may be a
different problem.
3. When both vehicles are running, let them
idle for a few minutes to charge the
discharged battery.
140
Hide quick links:
Advertisement
Table of Contents
