License Plate Lamp; Replacement Bulbs - Chevrolet Malibu 2010 Owner's Manual

License Plate Lamp

To replace the license plate lamp bulb:
1. Remove the license plate assembly by turning the
two screws counterclockwise.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Push the new bulb in and turn it clockwise to install.
5. Replace the license plate lamp by pushing it
through the fascia opening.
6. Turn the two screws that hold the license plate
lamp clockwise to reinstall.

Replacement Bulbs

Exterior Lamp
Back-up Lamp and Taillamp
License Plate Lamp
Turn Signal Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
921
168
3156
6-47