Chevrolet Malibu 2010 Owner's Manual page 89

6. To tighten the belt, push down on the child restraint,
pull the shoulder portion of the belt to tighten the
lap portion of the belt and feed the shoulder
belt back into the retractor. When installing a
forward-facing child restraint, it may be helpful to
use your knee to push down on the child restraint as
you tighten the belt.
7. Push and pull the child restraint in different
directions to be sure it is secure.
If the airbags are off, the off indicator in the passenger
airbag status indicator will come on and stay on
when the vehicle is started.
If a child restraint has been installed and the on
indicator is lit, see "If the On Indicator is Lit for a Child
Restraint " under Passenger Sensing System on
page 2-68 for more information.
To remove the child restraint, unbuckle the vehicle
safety belt and let it return to the stowed position.
2-57