Table of Contents
Advertisement
[Operation via recorder's main monitor]
Basic operations
To operate, use the mouse connected to the recorder to move the mouse cursor displayed on the main monitor
and left-click the buttons or tabs displayed on the screen. (Hereinafter, "Left-click..." will be described as
"Click..." in this document.)
In lines where the [▲]/[▼] buttons are displayed, the value on which the cursor is placed can be changed by
turning the mouse wheel. For example, when setting date & time, the hours, minutes and seconds can be
changed.
The shape of the mouse cursor will change as follows depending on the display screen and mouse operation.
: Normal operation
: When dragging a camera number panel (wide view screen)
Note:
• When no operation is made for 10 seconds or more, the mouse cursor will be hidden. The mouse cursor will
be displayed again when the mouse is moved.
• It is impossible to connect a mouse to the mouse connection port if the connector from the mouse is upside
down. When it is hard to connect, check the upside down position of the connector.
Logout
Click the [Logout] button. To log out, click the [OK] button in the confirmation window displayed.
Note:
• If "On" is selected for the "Auto login" (☞ Page 57), login will be automatically performed by the user reg-
istered in "Auto login user" in the logged-out state.
96
Advertisement
Table of Contents
