Operations Flow - Panasonic WJ-ND300 Setup Instructions

Operations Flow

The operation flow of this unit is as follows.
z
x
c
v
Network settings of this unit
b
Network settings of the PC
n
Format (initialize) hard disk drives
Display the camera setup menu and
m
perform the network settings of
cameras.
,
Setup (pages 26 - 86)
8
Rack Mounting
Connections
Startup
(page 9)
(page 11)
(page 90)
Start operation
Install the unit in the rack.
Refer to the Installation Guide for further information
about rack mounting.
Connect PCs, cameras and extension units.
Start connections in the following order: PC →
Cameras → Extension units
Refer to the provided Installation Guide for further infor-
mation about connections.
Turn on the power of the unit.
For further information, refer to the Installation Guide.
Operate the buttons on the front panel of the unit to per-
form the network settings of the unit.
Change the TCP/IP setting of the PC to conform to the
settings of this unit.
Display the disk configuration menu and format the
hard disk drives.
Refer to the Setup Instructions (PDF) for descriptions of
how to display the camera setup menu.
Perform the required settings on the setup menu to
start operation.