Table of Contents
Advertisement
Step 2
Click the [Mic setup] button.
→ The "Microphone setup" panel will be displayed.
→
[Mic Directionality]
The sound directionality can be set up.
Off: No directionality
On: Directionality set over a specified sound
collecting position
The sound collecting position will be displayed on the
camera image with
icon.
To change the sound collecting position, click on the
image at any place where you wish to hear a sound.
Note:
• The directionality of the microphone and the
sound collecting position are memorized per cam-
era number.
• The directionality of the microphone and the
sound collecting position are retained even if the
recorder is rebooted (however note that changing
the camera registration or initializing the settings
will reset all the settings).
• If clicked on a place beyond the setting range, the
sound collecting position will not be changed.
• The icon which indicates the sound collecting
position will appear only when the microphone
setup panel is displayed and "On" is selected for
the directionality of the microphone.
• When playing back the recorded images of the
camera in which audio from the network micro-
phone is recorded, non-directional sound may be
played if the network microphone has not been
registered with the corresponding camera num-
ber.
193
Advertisement
Table of Contents
