Table of Contents
Advertisement
[Setup via recorder's main monitor]
Configure the settings relating to maintenance [Maintenance]
The version of the recorder and disk information is displayed, and the settings relating to hard disk drives can
be configured on the setup menu - the "Advanced setup" menu - the "Maintenance" page. It is also possible to
initialize the setup data of the setup pages, check the system logs and register the license on this page.
The "Maintenance" page has [System information], [HDD information] and [System management] tabs.
Check the system information such as the version
[System information]
The version (of the software and hardware), serial number, network information (MAC address, IP address, line
speed), temperature inside the recorder and highest temperature inside the recorder, etc. are displayed on this
tab.
Note:
• System information will not be updated while the
"Maintenance" page is being displayed.
• Besides the setting value for "Line speed", the
actual line speed will be displayed in "( )".
■ SD card information of camera
The SD card information and the SD memory backup
progress of the camera in which the SD memory
backup is set are displayed. Click [View >] button to
display the following screen.
[Software] Displays the software version of the cam-
era.
[SD card model number] Displays the model number
of the SD memory card used for the camera.
[Operation time] Displays the operation time of the SD
memory card used for the camera.
[Overwrite time] Displays the number of the overwrit-
ing of the SD memory card used for the camera.
[Backup progress information] Displays the progress
of the SD memory backup.
Date & time display: Date and time of the image
being acquired from the SD memory card of
the camera.
- : No image data to be acquired from the SD
memory card of the camera is available.
Note:
• Read "readme.txt" in the CD-ROM provided with
the recorder for applicable cameras.
63
Advertisement
Table of Contents
