Pulse Xyleject Operator's Manual page 12

With the Suction Tube still inserted into the Medicine Vial, slowly disconnect the Suction Tube from
the Holding Compartment, allowing the contents of the Suction Tube to drain. Place the Holding
Compartment upright and slowly push the Compartment Plunger upward until remaining air bubbles
are removed. When finished, unscrew the Compartment Plunger from the Holding Compartment.
Install the Holding Compartment into the black Barrel
Place the Holding Compartment into the rear of the Barrel as shown with the Luer Connection
pointing towards the Inlet Tube. Push the Holding Compartment into the Barrel until it reaches the
Inlet Tube.
12