Advertisement
Setting Cruise Control
Resuming a Set Speed
If you
we your cruise control swil
I
on a
!n
you're not using cruise, you might hit a button
and go into cruise when you don't want to. You
could be startled and even lose control. Keep the
cruise control switch OFF until you want to use it.
1. Move the cruise control switch to ON
2. Get up to the speed you want.
3. Press in the SET button
at the end of the lever
and release it.
4. Take your foot off the accelerator pedal.
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don't need to reset it.
Once you're going about
25 mph (40 km/h) or more,
you can move the cruise
control switch from ON to
R/A for about a 1/2 second.
You'll go right back up to your chosen speed and
stay there.
Remember, if you hold the switch
at
R/A longer than
a 1/2 second, the vehicle will keep going faster until
you release the switch or apply the brake. You could be
startled and even lose control. So unless you want to go
faster, don't hold the switch at R/A.
2-41
Advertisement
