Advertisement
5. Turn the bulb
counterclockwise to
remove it.
6. Put the new bulb into the headlamp lens assembly
and turn it clockwise until it is tight.
7. Plug in the electrical connector.
8. Put the headlamp lens assembly back into the
vehicle. Install and tighten the screws.
Front Turn Signal Lamps
If you have fog lamps, the fog lamp bracket must
be removed before you can replace the front turn
signal lamps.
.
1. Reach under the bumper and behind the turn signal
2. Turn the socket counterclockwise and pull it out.
3.
Holding the base of the bulb, pull the bulb straight
lamp assembly.
out of the socket.
4. Push the new bulb into the socket until it clicks.
5. Put the socket back into
the
turn signal lamp
assembly and turn it clockwise until
it
locks in place.
6-35
Advertisement
