Advertisement
Lap Belt
If your vehicle has a front bench seat, someone
can
sit in
the center position.
When you sit in the center front seating position, you have
a lap safety belt, which has no retractor. To make the belt
longer, tilt the latch plate and pull
it
along the belt.
To make the belt shorter, pull its free end as shown until
the belt is snug.
Buckle, position and release
it
the way as the lap part of
a lap-shoulder belt. If the belt isn't long enough, see
"Safety Belt Extender" at the end of this section.
Make sure the release button on the buckle is positioned
so you would be able
to
unbuckle the safety belt quickly
if you ever had to.
1-25
Advertisement
