TROUBLE SHOOTING GUIDE
ROPE(211) REPLACEMENT
1.
Gap
B
D
C
G
F
E
H
To replace the ROPE(211):
1. The PULLEY(202) at J needs to be disassambled
for removing the old ROPE(211).
A
2. Run the new ROPE(211) through the TOP SWIVEL
PULLEY BRACKET(14) from back to the front at A.
Slide the ROPE(211) through the gap at the side of
the bracket and make it align with the pulley. Refer
to detail view 1.
3. Continue routing the ROPE(211) from A to B
to C to D to E to F to G to H, then go through
the LOWER UPRIGHT COVER(122) of the
UPRIGHT FRAME(11) to the front at I. Attach
the ROPE(211) to the Bracket at J with the
PULLEY(202), PULLEY SHAFT(24), and
BUTTON HEAD BOLTS(M6x1x12mm)(146).
22
J
I