ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at
customerservice@staminaproducts.com.
Although the product included basic tools for assembly, we recommend to use your own tools for
assembly if it is available. Use the tools such as socket set, wrenches, and screwdriver.
NOTE: Assembly of the tower unit requires two people.
STEP 1:
To assemble the TOP PULLEY ASSEMBLIES onto the top of the UPRIGHT FRAME(11) by
attaching the RIGHT and LEFT TOP CONNECTORS(12, 13) to the UPRIGHT FRAME(11) with SOCKET
HEAD BOLTS(M12x1.75x80mm)(143) and WASHERS(M12xø24x2mm thick)(341).
NOTE: The ROPES(211) must be centered through the TOP CONNECTORS(12, 13) to prevent the
ROPES(211) from rubbing.
STEP 2:
There are several ties on the ropes to keep the ropes in place during shipping. Use scissors to
cut the ties. Be careful, do not damage the ropes.
STEP 3:
Remove the WEIGHT SHROUD(15) by unscrewing the BUTTON HEAD BOLTS(M6x1x12mm)
(146) from the UPRIGHT FRAME(11) and the MAIN BASE(1).
Ties
Ties
7