Storage; Maintenance - Stamina GYROTONIC Cobra Elite Owner's Manual

STORAGE

To store the GYROTONIC® Cobra® Elite Pulley Tower Combination Unit, simply keep it in a clean dry
place.

MAINTENANCE

The safety and integrity designed into the GYROTONIC® Cobra® Elite Pulley Tower Combination
Unit can only be maintained when the GYROTONIC® Cobra® Elite Pulley Tower Combination Unit is
regularly examined for damage and wear. Special attention should be given to the following:
1. Adjust the TENSION ADJUSTMENT KNOBS(325) and verify that the Brake System provides tension.
The Brake System should provide many years of use.
2. Verify that the ROPES(211, 212, and 213) and BUNGEE CORDS(42) are properly installed on the
Pulleys. Then pull the HAND STRAPS(217) to verify that the Rope/Pulley System travels smoothly.
3. Check the condition of the ROPES(211, 212, and 213) and BUNGEE CORDS(42). Replace the Rope
or the Bungee Cord if it is worn or damaged.
4. Check the HANDLEBAR(118) for cracks or other damage. Replace the HANDLEBAR(118) if it is
damaged.
5. Verify that the WARNING LABEL(266) is in place and easy to read. Call Stamina Products
immediately at 1-800-375-7520 for a replacement WARNING LABEL(266) if it is missing or damaged.
6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
7. Worn or damaged components shall be replaced immediately or the GYROTONIC® Cobra® Elite
Pulley Tower Combination Unit removed from service until repair is made.
8. Only Stamina Products supplied components shall be used to maintain/repair the GYROTONIC®
Cobra® Elite Pulley Tower Combination Unit.
9. Keep your GYROTONIC® Cobra® Elite Pulley Tower Combination Unit clean by wiping it off with
an absorbent cloth after use.
20