Driving Data - Skoda Octavia 2019 Owner's Manual

Double press – display menu with information on
the left side of the instrument cluster
Rotate – switch between information/menu
items
Press – change display/show menu items on the
right side of the instrument cluster
Press - change display/show menu items on the
left side of the instrument cluster

Driving data

Overview
The driving data display works with the ignition
switched on.
In the instrument cluster display
Depending on the equipment, the display of the in-
strument cluster shows information such as speed,
fuel consumption, range, etc.
In infotainment
The following information is displayed in the Info-
tainment.
Distance travelled
Driving time
Average speed
Average fuel consumption
Range
Memory
The system saves the driving data in the following
memories.
Since start
Driving data from the time of switching on the ig-
▶
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long-term
The driving data of all trips up to a total of 99
▶
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
Since refuel
Driving data from the time the fuel tank was last
▶
filled is stored in the memory. The memory is reset
the next time the tank is filled.
Driver information system ›
Operation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
Displaying driving data in the infotainment system
The driving data is displayed in the menu in the info-
tainment system.
Or:
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
press button . Turn the dial
sponding memory or press the dial to confirm the
memory.
›
To re-set the memory for the displayed driving da-
ta, press button or . Turn the dial
reset corresponding memory or press the dial to
confirm the re-set.
Selecting the memory in the infotainment system
The memory selection is made by touching the cor-
responding tab in the infotainment screen in the fol-
lowing menu.
Or:
Resetting the memory in the infotainment system
The memory is reset in Infotainment as follows.
Driving data 59
Press - display menu
A
with driving data on
the right side of the
instrument cluster
Double press - dis-
play menu with driv-
ing data on the left
side of the instru-
ment cluster
Rotate - switch be-
tween drive data
›
To set the memory for
the displayed driving
data on the right, press
button . Turn the dial
to select the corre-
A
sponding memory or
press the dial to con-
firm the memory.
›
To select the memory
for the displayed driv-
ing data on the left,
to select the corre-
A
to select
A