HDD Power Down
This item allows you to set the time period before the hard disk drive
will be powered down while all other devices remain active. Available options
are [Disabled] and [1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Min]. Default value is
[Disabled].
Soft-off by PWR-BTTN
Set this itme to [Delay 4 Sec] to allow pressing the power button for
more than 4 seconds to force the system to enter the Soft-Off state. Available
options are [Delay 4 sec] and [Instant-Off]. Default value is [Instant-Off].
Wake-Up by PCI Card
This item allows you to enable the system to wake up through PCI Card
peripheral. Available options are [Enabled] and [Disabled]. Default value is
[Disabled].
Power On by Ring
This item allows you to enable the system to wake up through modem
card while the telephone is ringed. Available options are [Disabled] and
[Enabled]. Default value is [Enabled].
Wake Up On LAN
To use this function, you need a LAN add-on card which supports
power on functions. It should also support the wake-up on LAN jumper
(JWOL1). This function allows your computer to be booted from another
computer via a network by sending a wake-up frame or signal. Available op-
tions are [Enabled] and [Disabled]. Default value is [Enabled].
3-27
Award
®
BIOS Setup