MSI MS-6395 ATX Manual page 55

Chapter 3
Typematic Rate (Chars/Sec)
This item allows you to set the number of times a second to repeat a
keystroke when you hold the key down. Available options are [6], [8], [10],
[12], [15], [20], [24], and [30]. Default value is [6].
Typematic Delay (Msec)
This item allows you to set the delay time before the key begins to
repeat the keystroke while holding down the key. Available options are [250],
[500], [750], and [1000]. Default value is [250].
Security Option
This item allows you to limit access to the system and Setup, or just to
Setup. When you choose from the default of [Setup], the system will boot, but
access to Setup will be denied if the correct password is not entered at the
prompt. When you choose [System], the system will not boot and access to
Setup will be denied if the correct password is not entered at the prompt.
Available options are [Setup] and [System]. Default value is [Setup].
OS Select For DRAM > 64MB
This itemallows you to run the OS/2
DRAM. When you choose from the default of [Non-OS2], you cannot run the
®
OS/2 operation system with > 64 MB of DRAM. When you choose [OS2], it
is possible. Available options are [Non-OS/2] and [OS2]. Default value is
[Non-OS/2]
Setting options: [No] [Yes]. Default value: [No]
®
operating system with > 64 MB of
3-12