Table of Contents
Advertisement
IPCA Function
This item allows you to set ACPI (Advanced Configuration and Power
Management) function. Available options are [Enabled] and [Disabled].
Default value is [Enabled].
ACPI Suspend Type
This item allows you to set the ACPI suspend type you will use.
Available options are [S1 (POS)] and [S3 (STR)]. Default value is [S1 (POS)].
S1(POS)
S3(STR)
Power Management
This item allows you to select the type (or degree) of power saving and
is directly related to the following modes: HDD Power Down, Doze Mode,
and Suspend Mode. There are three options for Power Management, two of
which have fixed mode settings.
User Define Allows you to set each mode individually. When not
Min Saving Minimun power management. Suspend Mode = 1 hr.,
Max Saving Maximun power management. Suspend Mode = 1 min.,
The S1 state is low power state. In this state, no system
context (CPU or chipset) is lost and hard ware maintains
all system context.
The S3 state is a lower power state where the information
of system configuration and open applications/files is
saved to main memory that remains poweres while most
other hardware components turn off to save energy. The
information stored in memory will be used to restore the
system when an " wake up" event occurs.
disabled, each of the ranges are from 1 min. to 1 hr. except
HDD Power Down which ranges from 1 min. to 15 min.
and disabled.
and HDD Power Down = 15 min.
and HDD Power Down - 1 min.
3-25
Award
®
BIOS Setup
Advertisement
Table of Contents
