MSI MS-6395 ATX Manual page 54

Boot Other Device
This function allows the system to try to boot from other device if the
system fails to boot from the 1st/2nd/3rd boot device.
Swap Floppy Drive
This item allows you to choose from the default of [Disabled] or choose
[Enabled] to switch the floppy disk drives between being designated as A and
B. Available options are [Disabled] and [Enabled]. Default value is [Disabled].
Boot Up Floppy Seek
This function allows the system to check if floppy installed or uninstalled
when booting up the computer. Available options are [Disabled] and [Enabled].
Default value is [Enabled].
Boot Up NumLock Status
This item allows you to set the NumLock status when you boot up your
computer. When you choose from the default of [On], the keypad is numeric
keys; when you choose [Off], the keypad is arrow keys. Available options are
[On] and [Off]. Default value is [On]
Gate A20 Option
This allows you to set the Gate A20 status. When you choose from the
default of [Fast], the Gate A20 is controlled by chipset. When you choose
[Normal], a pin in the keyboard controller controls the Gate A20. Available
options are [Fast] and [Normal]. Default value is [Fast].
Typematic Rate Setting
This item allows you to set the keystrokes repeat rate determined by
keyboard controller. When you choose " Enabled' , the " Typematic Rate" and
" Typematic Delay" can be selected. Default value is [Disabled].
3-11
Award ® BIOS Setup