Table of Contents
Advertisement
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with sup-
port for two IDE channels. Choose the default of [Enabled] to activate each
channel separately. Available options are [Enabled] and [Disabled]. Default
value is [Enabled].
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased performance. In
Auto mode, the system automatically determines the best mode for each device.
Available options are [Auto], [Mode 0], [Mode 1], [Mode 2], [Mode 3], and
[Mode 4].
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver (Windows
95 OSR2 or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA/33 and Ultra DMA/66, select [Auto]
to enable BIOS support. Available options are [Auto] and [Disabled]. Default
value is [Auto].
USB Controller
This item allows you to control the function of USB controller. When
choosing [Enabled], the USB controller can be used while choosing [Disabled]
make USB has no function. Available options are [Enabled] and [Disabled].
Default value is [Enabled].
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard. Available options are [Enabled] and
[Disabled]. Default value is [Disabled]
3-19
Award
®
BIOS Setup
Advertisement
Table of Contents
