Error Flowchart; Main Flowchart - Panasonic FP3 Technical Manual

5-2.Error Flowchart

If an error has occured in the W Type(Wire) Link System, the error can be checked and the correct steps to take
can be determined with the following flowcharts.

1. Main Flowchart

Abnormality is detected
(Communication cannot
be established.)
Is the POWER LED on the
Power Supply Unit ON?
Is the ALARM LED on
the CPU ON?
Is the ALARM LED on the W
Type(Wire) Link Unit ON?
Are ready the units that can
be used for the P/W PC Link
communication?
Does the ERROR 1 or 2 LED
on the W Type(Wire) Link Unit
turn ON or flash?
Please contact us
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
When a hardware self-diagnostic error occurs, both
the ERROR 1 and ERROR 2 LEDs flash.
Please refer to the FP3 HARDWARE Technical Manual.
Go to the "ALARM LED ON Flowchart".
Go to the "P/W PC Link Function Not Available Flowchart".
Go to the "ERROR LED ON/Flash Flowchart".
5-2. Error Flowchrt
57