Panasonic FP3 Technical Manual page 35

Hide thumbs Also See for FP3:
Table of Contents

Advertisement

• The allocation of the areas available for the P/W PC LINK 0 and P/W PC LINK 1 in the CPU are specified
using the system registers as follows ;
System register
Contents
number
Link relays(L) size of the relay link
40
area in P/W PC Link 0
Link data register(LD) size of the
41
data link area in P/W PC LINK 0
42
Send relay
link area
setting
43
44
Send data
link area
setting
45
Link relays(L) size of the relay link
50
area in P/W PC Link 1
Link data register(LD) size of the
51
data link area in P/W PC LINK 1
52
Send relay
link area
setting
53
54
Send data
link area
setting
55
Notes :
• Link relays(L) are assignments performed in units of words( 1 word = 16 bits).
If the system register number 40 is set to 64, all the relays(1,024 points: L0 to L63F) can be
used as the relay link area for the P/W PC LINK 0.
• The send area is used for sending data to the other Programmable Controllers in the PC Link
Mode in the same network. The rest area of the PC Link Area is automatically allocated as the
receive area.
*If the send area size is set to 0, all of the area is used as the receive area.
*If the send area size is set to the maximum value,
send link relay area
send link data regiseter area : 127 link data registers are used as send link data registers.
• Even if 128 link data registers are available for use as the PC Link Area, a maximum of 127 link
data registers can be used for the send area.
• Make sure that the send area allocated is within the range of the specified PC Link Area.
• Within the same network, the send area addresses must not be overlapped.
Default
Starting address for the
send relay link area
Size of the send relay
link area
Starting address for the
send data link area
Size of the send data
link area
Starting address for the
send relay link area
Size of the send relay
link area
Starting address for the
send data link area
Size of the send data
link area
: all of the relays are used as send link relays
Setting range
value
0 to 64 words from address L0
0
(0 to 1,024 points)
0 to 128 words from address LD0
0
0th to 63rd word
0
0 to 64 words from the starting
0
address
0th to 127th word
0
0 to 127 words from the starting
0
address
0 to 64 words from address L64l
0
(0 to 1,024 points)
0 to 128 words from address LD128
0
64th to 127th word
64
0 to 64 words from the starting
0
address
128th to 255th word
128
0 to 127 words from the starting
0
address
4-2.P/W PC Link
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fp5

Table of Contents